Can You Use a Wax Ring On a RV Toilet

Can You Use a Wax Ring On an RV Toilet : Just in 9 Steps

Last Updated on May 16, 2023

A wax ring attached to the toilet in a recreational vehicle may seal the toilet. Other RV toilets come with rubber rings that can be used to prevent leaks. When rubber rings are used in an RV, they will not melt in the heat as they would melt in a wax ring.

To maintain the integrity of your RV, you should only replace the RV’s ring if it is damaged or worn. You are wondering whether the wax rings on your RV toilets work. Would you like to know if they work?

This writing on can you use a wax ring on an RV toilet aims to provide information about whether your RV toilet flange has a wax ring and answer any other questions regarding RV toilets. If your RV toilet stops holding water, it is necessary to fix the issue.

Can You Use a Wax Ring On an RV Toilet & Why?

Use a Wax Ring On a RV Toilet

If you are using an RV toilet, it is essential to use a wax ring. Especially when maintaining an RV toilet, one of the most important things to remember is to use a wax ring. A wax ring helps to create a tight seal around the toilet holding tank, preventing odors from escaping.

It also helps to prevent leaks, which can be a real problem in an RV. A wax ring provides an extra layer of protection against bacteria and other contaminants. A wax ring is essential for keeping an RV toilet clean and safe.

RV Toilet Wax Ring Replacement: How Do You Do It?

RV Toilet Wax Ring Replacement

Whether you have a leaky RV toilet seal that needs wax ring replacement or wants to ensure the wax ring seal is appropriately replaced, following a few easy steps is the best way to do so. The steps to be taken are as follows:

  • The water supply valve should be disconnected from the water supply.
  • Two ground bolts keep the toilet firmly attached to the ground. They must be disconnected.
  • To remove the toilet bowl, it is necessary to unbolt it from the base.
  • It is essential to remove any old wax ring seals that are present.
  • It is essential to clean the surface before you install the new seal on the wax ring.
  • It is recommended that the RV toilet seal should be replaced as soon as possible.
  • Bolts should be used to secure toilet bowls to the toilets themselves.
  • A bolted connection should be between the RV toilet and the RV base ground.
  • After you have turned on the valve, you will immediately begin to receive water from it.

Our discussion of each step will be further elaborated on in the following sections.

Why Do RV Toilet Wax Seal Rings Need to Be Used?

Wax seal rings are the most common toilet seals used in RVs and also the most popular type of RV toilet seal ring. They are inexpensive, easy to install, and have a very good seal; all these facilities make them a popular choice among RV owners.

Wax seal rings come in different diameters to fit different drain sizes. Before buying a wax seal ring, you must know your drain size. RV wax seal rings come in a variety of thicknesses. The thicker the wax seal ring, the better the seal will be.

Wax seal rings are also available in different Wax formulas. Some waxes are more complex, and some will last longer than others. Wax seal rings work by forming a barrier between the toilet and the sewer line, preventing sewage from leaking into the RV.

Wax seal rings can be difficult to remove if they become dry or cracked, and they may need to be replaced more often than other types of seals. You will need to decide what type of wax you want based on your needs.

What is the Expected Lifespan of an RV Toilet Seal?

What Is the Expected Lifespan Of an RV Toilet Seal

Depending on the type of toilet seal you have, you should expect your toilet seal to last for a long time. It is recommended that wax toilet seals last for a minimum of 30 years. As a result of not calculating the RV’s environmental conditions, this figure is inaccurate.

Because of the heat generated by RV toilets, wax rings tend to last for fewer years. In this regard, rubber toilet seals are often selected by RV owners. When a rubber toilet seal is used for a long time, it will dry out.

Keeping it lubricated for proper maintenance is the best way to avoid this problem. Rubber toilet seals for RVs are designed to last long if properly maintained.

Maintain the Wax Ring Seal in RV Toilets

You may have chosen the rubber seal on your RV toilet repair because of its durability, which is a good reason why it was chosen. If you follow this procedure, the rubber toilet seal must be lubricated once a year. If you don’t follow this procedure, you will need to do so every year.

When you need to lubricate the seal on your toilet, you need first to be able to reach it. When the toilet is being removed, the water supply valve that feeds water to the toilet must be shut down so that no water is being fed to it.

You should then remove the toilet bowl from its base and turn it on its side to remove it from the toilet bowl. The rubber seal on the wax ring for the RV toilet can be found on the underside of the toilet. When the seal has been thoroughly cleaned, it must be lubricated after the surface has been cleaned.

The rubber seal can be treated by applying vaseline liberally with your fingers over it. It is essential to coat the seal before installing it thoroughly. This will give the rubber a longer shelf life, preventing it from drying.

Once the toilet has been reinstalled and the water has been turned on, turn on the faucet to ensure it works correctly. RV toilet rubber seals have now been lubricated for the rest of the year and should function properly.

What is the Reason Your RV Toilet Doesn’t Hold Water?

If your RV toilet isn’t holding water, it is usually an easy fix because it is caused by a simple problem. As the rubber wears out on the blade seals, they become worn out and need to be replaced. Some blades seal the toilet bowl so that water does not leak out.

There comes a time when the seals in toilets wear out from being overly old or too dry, which makes it impossible for water to stay in the bowl.

A simple fix would be to replace the old blade seal with a new one, and the problem would be solved. I will tell you that removing the toilet is not difficult, but you must turn off the water first. Most people can repair things they need independently because it is a simple task.

Water Supply Valve Must Be Turned Off

Water Supply Valve Must Be Turned Off

The water in the toilet must be turned off before you can unbolt it. Ensure the water supply valve is closed by turning it clockwise. All water to the toilet should be shut off by this action. It is unnecessary to empty the RV toilet bowl before you begin since it is an RV toilet. Unbolting the toilet is now possible.

Remove the Holding Bolts of the RV Toilet to the Ground

Unbolting the toilet is required before you can proceed. Using an adjustable wrench or a socket wrench is also possible, but you need to check which size socket wrench is appropriate for your toilet’s bolt.

You can move the toilet once the nuts have been removed from the bolts. Store the nuts where you will have access to them again to ensure that you can locate them again.

Remove the Bolts from the RV Toilet Bowl

It is now possible to adjust the toilet so that you can access the bolts holding the toilet bowl once you have removed the bolts from the toilet and are free to move around.

As soon as the toilet has been fully disassembled, it will be easier to work on it and accomplish its repair. It is necessary to remove the nuts attached to the bolts that secure the toilet together to remove the nut.

The toilet bowl should be moved aside while it is detached so as not to damage it. It will now be possible for you to reach the seal on the toilet once you have reached this stage.

Replace the Old Wax Ring with the New Seal

Replace the Old Wax Ring with the  New Seal

It’s possible to find grime or other impurities on the surface of the toilet when you pull off the old seal. There is now an opportunity to access the old seal of the toilet. A good idea would be to take it off the RV toilet.

If you want your new seal to work optimally, remove these impurities. The grime and gunk stuck to where the seal was can be cleaned up with warm water and a wet washcloth. The new seal can be inserted after a thorough cleaning.

The New Seal is to Be Inserted

The old rubber seal must be removed now that we have cleaned the surface. Replace the old rubber seal with the new one. A vaseline layer is sometimes applied to improve the sealing properties. The seal life is extended by doing this, but it isn’t totally necessary.

Toilet Bowls Should Be Bolted to Toilets

In the meantime, let’s put the toilet back together after the seal has been replaced. To solve this problem, reverse the order of operations. The first thing you need to do is re-bolt the bowl to the toilet. Once the ground has been bolted back to the toilet, you are ready to proceed.

Install a Flange Bolt in the Ground for the Toilet

A toilet’s drain pipe can be aligned with the floor flange bolt and then secured with nuts by bolting the toilet to the ground. If the nuts are overtightened, the toilet might crack. When you sit on the toilet, tighten only enough so that it doesn’t rock back and forth.

Connect the Water Supply Valve to the Water Supply

The water must be turned on as soon as the toilet is reassembled. Make sure the water supply hose is connected to the toilet. When the water comes on, turn the supply valve counterclockwise.

Check your toilet’s operation by giving it a test flush. A leak might also be worth checking for. You might need to retighten the hose if you notice a leak.

What Have We Learned in Brief?

We hope that our writing on “can you use a wax ring on an RV toilet” reading gave you more information on what you do you need to do. When it comes to RV toilets, the most important thing you can do is to ensure that the wax ring is in place. This will help seal the toilet to the floor and prevent leaks.

It is also essential to ensure the flange is level before installing the wax ring. If it is not level, it can cause the wax ring to leak. Once you have installed the wax ring, you should be able to use your RV toilet without any problems. Replace the wax seal on your RV toilet floor if it is damaged.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top